Products – FYMCO

日本ASAHI FIBER高效能真空斷熱板

fymco_backstage — Tue, 22 Dec 2020 09:04:45 +0000

DOWSIL™ 1-2577 Conformal Coating

fymco_backstage — Fri, 06 Nov 2020 01:23:13 +0000

One-part, transparent medium viscosity conformal coating with firm, abrasion resistant surface after cure.

Thermosetting
Solvent Borne
One-part
Dielectric Constant at 100Hz	2.74
Dielectric Constant at 100kHz	2.74
Dielectric Strength	400 volts per mil v/mil
Volume Resistivity	5e+013 Ω・cm
Temperature Range	-45 to 200 °C
Durometer-Shore A	80 Shore A
Viscosity	950 mPa.s
Dispensing Characteristics	Thicker layer application 850 to 2500 cps
Color	Clear

這篇文章 DOWSIL™ 1-2577 Conformal Coating 最早出現於 FYMCO。

JAPAN ASAHI KASEI NEOMA FORM

fymco_backstage — Thu, 05 Nov 2020 03:13:03 +0000

High-performance insulation panels

There are many products for thermal insulation, like glass fiber, rock wool, PU foam, Styrofoam, but have there own pros and cons.
The material which integrate their advantage is NEOMA foam.

It is made of phenol. Compare with other types of plastic usually melt by heat, when phenol exposed to heat goes harden. Now is usually used on heat-resistant or fire-resistant.

ASAHI KASEI is devote to developing thermal insulation products. NEOMA foam have 4 advantages- “High-performance”, “Long-term integrity”, “Safety” and “Ecology”, especially high-performance thermal insulation.

It is thinner than other thermal insulation products to save interior place while being high quality both. And also get a very high opinion of NEOMA foam.

4 advantages of NEOMA foam

High-performance
λ=0.020W/(m‧K)
Thermal conductivity among lowest of other material.

Long-term integrity
Though retention of internal gas by cell-membrane gas barrier
to keep lasting high-level performance.

outer air and internal gas exchanging image

Safety
Carbonizes under direct flame,
with low gas emission and no spread in combustion.

Flame-resistance testing

Obtain Japan Quasi-noncombustible Materials QM-0825

Ecology
Free from ozone-depleting fluorocarbon foaming agents.

這篇文章 JAPAN ASAHI KASEI NEOMA FORM 最早出現於 FYMCO。

Tape Squares

fymco_backstage — Mon, 21 Sep 2020 09:00:02 +0000

Provide square sheet processing service with different tapes on release products. Can cutting by each size for custom needs

If there is question about tape squares please contact us: service@fymco.com.tw

這篇文章 Tape Squares 最早出現於 FYMCO。

Nitto Denko No.903UL/No.973UL-S

fymco_backstage — Thu, 09 Jul 2020 07:47:17 +0000

General Properties:

Items	Unit	No.903UL			No.973UL-S
Material		PTFE			PTFE + Glass cloth
Thickness	mm	0.08	0.13	0.18	0.13
Adhesion Strength	N/19mm	5.6	7.1	7.4	6.8
Surface resistivity	Ω	16 10			–
Color		Gray
Continuous Service Temperature	℃	ー60～260

Advantages:

Heat resistance – Continuous service temperature -60℃~+260℃, Melting point 327℃

Low frictional characteristics – Low coefficient of friction

Desirable electrical properties –

Chemical resistance –

Non- adhesive characteristics –

Weatherability –

Usage example:

Heat sealing, mold stripping, Sliding material.

Prevents adhesives from sticking.

這篇文章 Nitto Denko No.903UL/No.973UL-S 最早出現於 FYMCO。

Nitto Denko LMS-7075AB-T

fymco_backstage — Wed, 17 Jun 2020 09:20:37 +0000

General properties:

Item	Unit	LMS-7075AB-T
Thickness	mm	0.075
Color	–	Light blue	Clear
Adhesive Strength	N/20mm	0.87

Usage example:

Surface protection of stainless, aluminum plates,smooth glass.

Carrier of dicing, transferring of wafer(chip)’s process.

Notice:

Please inspect the adaptability with surface of adhesion before application.

Adhesive effect will depending on material, surface finishing, environment of storage, period after application.

這篇文章 Nitto Denko LMS-7075AB-T 最早出現於 FYMCO。

Nitto Denko SPV-214RT

fymco_backstage — Wed, 17 Jun 2020 09:10:17 +0000

General properties:

Item	Unit	SPV-214RT
Thickness	mm	0.120
Color	–	Clear
Adhesive Strength	N/20mm	0.98

Usage example:

Surface protection of stainless, aluminum plates,smooth glass.

Carrier of dicing, transferring in wafer(chip)’s process.

Notice:

Please inspect the adaptability with surface of adhesion before application.

Adhesive effect will depending on material, surface finishing, environment of storage, period after application.

這篇文章 Nitto Denko SPV-214RT 最早出現於 FYMCO。

Nitto Denko SPV-KL680TRB

fymco_backstage — Wed, 17 Jun 2020 09:03:36 +0000

General properties:

Item	Unit	SPV-KL680TRB
Thickness	mm	0.08
Color	–	Light blue
Adhesive Strength	N/20mm	0.28

Usage example:

Surface protection of stainless, aluminum plates,smooth glass.

Carrier of transferring and surface protecting of wafer(chip)’s process.

Notice:

Please inspect the adaptability with surface of adhesion before application.

Adhesive effect will depending on material, surface finishing, environment of storage, period after application.

這篇文章 Nitto Denko SPV-KL680TRB 最早出現於 FYMCO。

Nitto Denko SPV-KL680RB/KL680RT

fymco_backstage — Wed, 17 Jun 2020 08:56:47 +0000

General properties:

Item	Unit	SPV-KL680RB	SPV-KL680RT
Thickness	mm	0.08	0.08
Color	–	Light blue	Clear
Adhesive Strength	N/20mm	0.58	0.53

Usage example:

Surface protection of stainless, aluminum plates,smooth glass.

Carrier of transferring and surface protecting of wafer(chip)’s process.

Notice:

Please inspect the adaptability with surface of adhesion before application.

Adhesive effect will depending on material, surface finishing, environment of storage, period after application.

這篇文章 Nitto Denko SPV-KL680RB/KL680RT 最早出現於 FYMCO。

Nitto Denko SPV-225

fymco_backstage — Wed, 17 Jun 2020 05:50:01 +0000

General properties:

Item	Unit	SPV-225RB
Thickness	mm	0.08
Color	–	Light blue
Adhesive Strength	N/20mm	0.95

Usage example:

Surface protection of stainless, aluminum plates,smooth glass.

Carrier of dicing, transferring, or pad lift-off in wafer(chip)’s process.

Notice:

Please inspect the adaptability with surface of adhesion before application.

Adhesive effect will depending on material, surface finishing, environment of storage, period after application.

這篇文章 Nitto Denko SPV-225 最早出現於 FYMCO。